Caring for Concrete
Whether or not you are a business or homeowner, concrete is found in almost every contemporary structure. Concrete stems way back to the Ancient Romans and they were put to use commonly in their buildings. Because concrete has been around it’s been predisposed to discolorations and stains, however, the latest technology can restore it to its almost original color. Correctly eliminating grime and various substances that stain the concrete will require different kinds of pressure washing techniques.
Concrete is a blend of small gravel, also known as rocks, and cement. When you mix cement and water, it will result into a bonding agent that will hold the gravel together. Such a combination is far stronger compared to using cement only. However, it creates more gaps in places where undesired materials can settle. Given that cement is likely to adhere to other materials, it can be complicated to clean especially if you do not have the right tools for a proper pressure washing.
Concrete commonly gets stained after some time because of grime and dirt that lays into the small gaps in the surface. The process is progressive and difficult to notice simply because the color becomes darker extremely slowly. This stain doesn’t result in any architectural problems or rock erosion, but dirt usually accumulates unequally across the area and sooner or later leads to unpleasant sequences.
Getting rid of dirt because of natural reasons is a simple process. Certain chemicals can assist in loosening the dirt trapped at the concrete’s tiny openings, which makes its removal a lot easier. However, you need to be careful when you are using such chemicals because there are variations that can harm the environment. You should also make sure that these chemicals do not run into the sewer systems. If you are doing a regular clean up, using chemical baths may not be necessary. All you need is pressure washing to get rid of the dirt. Blast the concrete surface using water at high pressure to loosen up the dirt and grime.
Concrete can also have stains that can be hard to get rid of. Carports and driveways, for instance, accumulate stains from the car’s motor oil. Any kind of paint, rust, or grease can stick to the concrete surface and be hard to remove under the right conditions. You will also find it hard to manually remove graffiti marks left by unforeseen acts of vandalism.
During these instances, you might have to conduct a more thorough cleaning. You may have to treat grime with chemical cleaners. Soak the area with the right solvent to loosen up the chemicals which may have bonded with the concrete surface. Once that is done, pressure washing will efficiently take out the debris. There are also instances when chemicals cannot be utilized and sandblasting is used as an alternative. Meanwhile, places that drain into bodies of water as well as historical sites and buildings cannot be treated using chemical solutions. The sand grains will scrub the concrete surface. Its effects are similar to that of a chemical treatment.
No matter what the primary cause is for your filthy concrete, a good mix of pressure washing and chemical solutions can bring back any dull surface to a brand new appearance. Tougher discolorations might require deeper cleanings, however regular upkeep of a concrete surface could help keep significant problems from coming up. Before utilizing chemicals of any sort, though, don’t forget to consult with your local safety regulations. You may also consider hiring a professional pressure washing company for a thorough cleaning.