A+ Pro Blog 

power washing

Do You Need To Power Wash Your Deck Before Staining?

You can easily and quickly prepare your deck for staining or painting by power washing it. However, it is not a prerequisite. As a matter of fact, in some instances, it is not even recommended since power washing can gouge and chip wood. There are other less aggressive options to power washing that can get rid of stains and discoloration on the surface. In case you find these methods ineffective, you always have the option to sand your deck.

You Need To Clean Your Deck

Be sure to get rid of the existing finish before you apply a new one because if you don’t, there is a high risk that your new finish will fail right away. It would stay above the old finish rather than penetrate it. It may even peel off eventually. In case you are staining an older deck, you must also get rid of the gray surface layer of oxidation in case you want the deck to look like it is brand new. You also need to clean your deck thoroughly because it can get rid of tannin, dirt, grime, rust stains, as well as other blemishes that may be visible through the finish.

The Benefits Of Using Power Washers

The power washer or pressure washer produces a high-pressure spray, which can wear off the wood’s surface layer effectively. It can remove the existing finish, stains, and gray wood, in just a single fell swoop. It can also get rid of debris from the space in between the decking boards, which can assist in preventing the growth of fungus and reduce the likelihood of rot. Since a pressure washer uses water only, it won’t cause any harm to the vegetation nearby. It also does not introduce any noxious gas into the air. There is no need for bending or scrubbing if you use a power washer unless you are using it together with a deck cleaning solution or if what you have is a gas powered model. Although, you can always hire a power washing company like A+ Pro Services to help you with this task. There is also no need to buy any other materials because all you need is the pressure washer.

How To Use The Power Washer Correctly

In case you are staining a new deck, you most likely do not need to power wash it. You can simply mop it using a deck cleaning agent and wash it off using a hose and water. You may also utilize a cleaning agent in the same manner on a dirty and old deck that may otherwise be damaged by a high pressured spray. But, you might need to scrub the deck using a stiff brush a few minutes after you applied the cleaning solution. In a few instances, sanding is a much better substitute to power washing Myrtle Beach since it smooths and flattens weathered boards while getting rid of the old finish. In case your deck is at least 100 square feet, you can save a lot of time and effort by renting out a flooring orbital sander to get the job done.

If you want expert help in power washing your deck, call A+ Pro Services now.

A+ Pro Services Inc.
Shallotte, NC 28470
(910) 754-2263

Myrtle Beach, SC 29577

Cities Served in Brunswick County:
Boiling Spring Lakes, Northwest, Southport, Belville, Bolivia, Calabash, Carolina Shores, Caswell Beach, Holden Beach, Leland, Winnabow, Navassa, Oak Island, Ocean Isle Beach, Sandy Creek, St. James, Sunset Beach, Varnamtown, Lockwood Folly, Northwest, Shallotte, Smithville Township, Town Creek, Waccamaw, Antioch, Ash, Batarora, Bell Swamp, Bishop, Biven, Bonaparte Landing, Boone’s Neck, Bowensville, Brunswick Station, Camp Branch, Cedar Grove, Civietown, Clairmont, Clarendon, Coolvale, Doe Creek, Eastbrook, Easy Hill, Longwood, Maco, Piney Grove, Red Bug, Sunset Harbor, Supply, Thomasboro, Winnabow

Cities Served – South Carolina
North Myrtle Beach, Cherry Grove, Little Rive, Longs, Loris, Myrtle Beach Surfside Beach, Conway, Carolina Forest