A+ Pro Blog 

Care of WindowsHow To Clean Your EZE-Breeze Vinyl Windows


Vinyl is a strong, resilient material specially formulated to resist deterioration from the sun’s ultra-violet rays. With proper care and cleaning, these sliding panes will give you years of  trouble-free service and prevent them from drying out or becoming brittle. Clean your Eze-Breeze sliding 

Step 1. With the vents in the closed position, raise the bottom panel approximately 1”, release the thumb latches and tilt the panel in. Rest the tilted panel on a chair or other support. Lower the remaining three panels to the bottom of the unit, raise the second panel approximately 1″, and tilt it in to rest on the bottom panel. Repeat until all remaining panels are tilted in. You may also completely remove panels to wash more freely and thoroughly.

Step 2. Brush or vacuum all areas of panel frame. Cleaning the main frame tracks and other metal parts with a soft cloth and clean water will keep the panels moving easily up and down. Avoid spraying wax or oil based lubricants as they will build up and attract dirt. Once dirt is removed, wash framing, tracks and sill with a soft cloth and one of the cleaners mentioned below.

Step 3. Starting with the top panel that is facing up, use a soft, lint free cloth and rinse it with clean water. Apply a cleaning solution of Woolite® or Murphy Oil Soap® and warm water (one cap-full to one gallon water). Be sure the panel is dry and free of spots. Then tilt the panel back into position and repeat the cleaning method on the opposite side. Repeat the process for the remaining panels, returning each to their normal position when clean. It will prolong the life of your Eze-Breeze Sliding Panels and reduce static electric charges that attract dust.

How to Remove Your PGT Eze-Breeze Sliding Panels for Cleaning

  • Start with the innermost panel (bottom panel).
  • Raise the bottom panel approximately 1”, release the thumb latches and tilt the panel in.
  • Lift one side of the panel to remove the pin at the bottom of the panel from track.
  • Carefully remove the panel, mark the panel number and set aside. Repeat from remaining panels.
  • Note: marking each panel will help you replace them in the proper order.
  • To replace, reverse the procedure.
  • It is also recommended to remove the panels and clean the screens. This process will help in keeping the vinyl clean.

Spring is almost here and the sun will be shining in your windows and brightening your day – but only if your windows are clean!. APlus Pro Window Services has the experience you need to properly clean your EZE-Breeze Windows. Call the experts if you need help with window cleaning Brunswick Country.

Call A+ Pro Window Services today or use our convenient scheduling system.

A+ Pro Services Inc.
Shallotte, NC 28470
(910) 754-2263

Myrtle Beach, SC 29577

Cities Served in Brunswick County:
Boiling Spring Lakes, Northwest, Southport, Belville, Bolivia, Calabash, Carolina Shores, Caswell Beach, Holden Beach, Leland, Winnabow, Navassa, Oak Island, Ocean Isle Beach, Sandy Creek, St. James, Sunset Beach, Varnamtown, Lockwood Folly, Northwest, Shallotte, Smithville Township, Town Creek, Waccamaw, Antioch, Ash, Batarora, Bell Swamp, Bishop, Biven, Bonaparte Landing, Boone’s Neck, Bowensville, Brunswick Station, Camp Branch, Cedar Grove, Civietown, Clairmont, Clarendon, Coolvale, Doe Creek, Eastbrook, Easy Hill, Longwood, Maco, Piney Grove, Red Bug, Sunset Harbor, Supply, Thomasboro, Winnabow

Cities Served – South Carolina
North Myrtle Beach, Cherry Grove, Little Rive, Longs, Loris, Myrtle Beach Surfside Beach, Conway, Carolina Forest